93 xp non working rpm gauge and loose hose

[Tomas Seadoo]

Hose that goes to the front right of the pwc where does that go? Also behind the connections for the vts system on the inside from where it is located up on the left side has a filter in the hose but no location or hose other than one above. Is it suppose to just get air? The rpm gauge doesn't work but could be loose connection on engine. Does anyone on here know where that would be at?

 

[LouDoo]

Maybe battery vent hose??? If you have a gel pack battery you won't need it.

Lou

 

[Tomas Seadoo]

Ok so any reason it would have a fileter on it then? Just to keep water out? Thanks for the information though.

 

[LouDoo]

Don't know, the only line that I know of is the oil filter. It wouldn't have anything to do with the Tach as the tach is electrical.

Maybe someone else would know?

 

[stap007]

The clear vent filter on the VTS connects to nothing. The vent hose from the battery to the right front connects to a one-way check valve right at its outlet to the out side. Your may be broken off were it exits the hull.

 

[Tomas Seadoo]

Thank You

I've not looked all kinds of boats but you've seen more than me or at least know where these go. Just didn't want to have loose hoses in the pwc. Thanks.