• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

93 GTX electrical won't start

Status
Not open for further replies.

southcycle

New Member
Hey Guys,
I'm working on my 93 GTX 650. It won't crank. Battery good, starter good, starter solenoid good. tested lanyard switch, start switch, stop switch per the manual, all good.
I cleaned every electrical terminal I could find. When I touch the Y/R wire from the solenoid to the battery lead with the lanyard on and start switch depressed it cranks- which I think tells me the stop switch, start switch, lanyard switch, starter, and starter solenoid are all working. I plugged in my spare MPEM and have the same symptoms. Any suggestions? This one ran fine last season...

Richard in Dallas
 
Status
Not open for further replies.
Back
Top