• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

787 in 96 gti

Status
Not open for further replies.

belzebub2u

New Member
heya all, was just given a 96 gti, but the motor is locked up, is it possible to install a 787 instead of the 717 and what all is required if anyone knows.
 
Anything is possible, but it's not a "Bolt-in" project. Probably not worth the time or the $$$ to do.
 
Did you take the plugs out and try to turn it over, if it's been sitting it may be hydro locked with oil that has leaked in from the rotary valve seal to the cylinders.. Be sure you cover the plug holes with a towel if you try this.. the oil will go everywhere.. FI you ned to replace the motor I would stick with the 717, it's a pretty good engine.. And be sure to ground the plug wires so there is no spark..
 
Status
Not open for further replies.
Back
Top