Hello
Have a ´96 GTX which is working great, except one thing. At WOT the tach shows about 6500 rpm. New set of carbs with accel pump is installed. I dont notice any bogging or stumbling, in water it restarts with just a push on the start button. I checked the rave valves and it was looking fine. They looked black but nothing excessive buildup on them. Just the extra oil i put in the fuel tank for the break-in period. I cleaned them but haven´t tested the ski since then.
Maybe running too rich? I didnt touch the hi speed screws but i backed out the low speed screws for easy starts and smoother idle.
Also tested the compression and it was about 175 psi. Too much or extremely good, or poor gauge?
Einar
Have a ´96 GTX which is working great, except one thing. At WOT the tach shows about 6500 rpm. New set of carbs with accel pump is installed. I dont notice any bogging or stumbling, in water it restarts with just a push on the start button. I checked the rave valves and it was looking fine. They looked black but nothing excessive buildup on them. Just the extra oil i put in the fuel tank for the break-in period. I cleaned them but haven´t tested the ski since then.
Maybe running too rich? I didnt touch the hi speed screws but i backed out the low speed screws for easy starts and smoother idle.
Also tested the compression and it was about 175 psi. Too much or extremely good, or poor gauge?
Einar