m_harrison
New Member
Hey guys,
I have a 2012 seadoo rxpx 260. I was out riding last weekend and I hit a few waves and it just shut off. It would not start again after that. When the key is put on, you get two good beeps and when you hit start, you hear the starter relay click. But wasn’t getting power to the other side of the solenoid where it goes to the starter. I took the starter solenoid out and hooked power and ground to the pins where the plug goes. Power to purple and ground to brown/yellow. I put a meter across the two posts and should have been reading continuity but wasn’t getting anything. So I replaced the solenoid but it still won’t start. I can hear the solenoid clicking over now, but still no power at the other side that goes to the starter. Has anyone seen this issue before? Is it possible my ecm went out? Any help is greatly appreciated.
I have a 2012 seadoo rxpx 260. I was out riding last weekend and I hit a few waves and it just shut off. It would not start again after that. When the key is put on, you get two good beeps and when you hit start, you hear the starter relay click. But wasn’t getting power to the other side of the solenoid where it goes to the starter. I took the starter solenoid out and hooked power and ground to the pins where the plug goes. Power to purple and ground to brown/yellow. I put a meter across the two posts and should have been reading continuity but wasn’t getting anything. So I replaced the solenoid but it still won’t start. I can hear the solenoid clicking over now, but still no power at the other side that goes to the starter. Has anyone seen this issue before? Is it possible my ecm went out? Any help is greatly appreciated.
