2010 RXT 260IS P0523/P0524 Oil Pressure Issue

[NC_Doo]

Just left the dock when buzzer went off and went into limp mode. P0217 (High Temp engine coolant) was the first code I saw. Come to find out that the hose clamp that attaches the coolant tank hose to the water pump housing had broken, hose came off and dumped the coolant. I got that repaired and now getting the P0523/P0524 Oil Pressure codes. I had noticed the oil light on the gauge had come on when all this happened. I've checked the oil level(no signs of water in the oil), checked oil filter, not collapsed, I've replaced the OPS with a new one, old one tested good, continuity normally closed and opened up above 25psi, checked oil pressure with a pressure gauge, 90psi at start up and dropped to about 55psi after about 3 minutes running on a hose, tested OPS wire back to the ECU and verified continuity. What am I missing? Does this code need a hard reset with a CanDoo Pro? I thought most codes clear when the problem is corrected?