W weave Member Aug 5, 2021 #1 Well this explains why it was damn near impossible to move into neutral or reverse (see pic). Counted turns on old cable but no way that’s right for new cable as the lever sticks up. So anyone have proper adjustment setting/steps? Attachments 4D4AAB12-D8F7-4C18-A97F-40C344439C06.jpeg 126.2 KB · Views: 9
Well this explains why it was damn near impossible to move into neutral or reverse (see pic). Counted turns on old cable but no way that’s right for new cable as the lever sticks up. So anyone have proper adjustment setting/steps?
P POPPS Well-Known Member Aug 6, 2021 #2 So generally at the venturi end,,,disconnect the cable...the nozzle should move freely..,the cable should move freely,,,adjustments for the reverse bucket should be made at the reverse handle,,,not at the nozzle.
So generally at the venturi end,,,disconnect the cable...the nozzle should move freely..,the cable should move freely,,,adjustments for the reverse bucket should be made at the reverse handle,,,not at the nozzle.
