2008 RXPT Impeller swap

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
I probably gunna need a new impeller soon. So just wondering if anyone has gone to a different pitch? I'd like more low end as we pull kids around and never hit top speed.
Also what is factory pitch?
 
both of the 08 x models look similar the sticker on the side should be a dead giveaway.

If no decals, then the P model has a single piece seat, the T model has a two piece seat. The answer might be different for the two models.

RXPX 2 seater

256.jpg




RXTX 3 seater
257.jpg



on my 08 TX I really like the 15/22R solas, but that came with other mods including intake & wedge, if you settle on an impeller that is an upgrade then you should strongly consider intake as well.

If I was buying new then a 4" intake would be my choice but a 3" does the trick too and used sets are cheap since all the junkies have moved to 4". You might find more low end and holeshot from the intake mod than you will get from the impeller do both and they work well together.
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top