-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
2007 rxp fire extinguisher
- Thread starter CAT-MAN
- Start date
- Status
Trigger type?....
I think you might be using the wrong kind. The ones we use for these tubes have the trigger assembly all within the diameter of the bottle. So, I don't see why it would only fit in one direction.
Go to your local Walmart, they carry the PWC extinguisher that fits your tube. I just bought one this past year. They are pretty cheap, I think I paid $12 bucks for it.
I do remember seeing two different kinds. The one with the trigger, that had a finger ring was the same size in diameter of the body but the trigger stuck out. The other one, the one I'm talking about, had the trigger assembly that was mounted within the diameter of the body of the extinguisher so it would just slide right inside the tube........:cheers:
I think you might be using the wrong kind. The ones we use for these tubes have the trigger assembly all within the diameter of the bottle. So, I don't see why it would only fit in one direction.
Go to your local Walmart, they carry the PWC extinguisher that fits your tube. I just bought one this past year. They are pretty cheap, I think I paid $12 bucks for it.
I do remember seeing two different kinds. The one with the trigger, that had a finger ring was the same size in diameter of the body but the trigger stuck out. The other one, the one I'm talking about, had the trigger assembly that was mounted within the diameter of the body of the extinguisher so it would just slide right inside the tube........:cheers:
It fit upright in my old ski with the purple tubes -- here is a link of the one I am trying to fit in there
http://www.fastcycleparts.com/showproduct.aspx?variantid=30430&aid=10050
it seems as though the front/forward portion of the tube narrows but still has room for the top/neck of the bottle.
Jim
http://www.fastcycleparts.com/showproduct.aspx?variantid=30430&aid=10050
it seems as though the front/forward portion of the tube narrows but still has room for the top/neck of the bottle.
Jim
To expensive...
If this link works, here is a pix of the one you should be using. It fits right inside the tube, face up. http://www.westmarine.com/webapp/wc...nc=high_res.jsp&image=126219.jpg&desc=Mariner Dry Chemical Fire Extinguishers (in the pix, labeled PWC and has the red cap).
I believe it was $14 bucks. If the link above doesn't work, go to this link, it's their home page and once it opens, use their search engine for PWC fire extinguisher. It will open a link to several. The one you want has a read cap. http://www.westmarine.com/webapp/wc...oreId=10001&langId=-1&catalogId=10001:cheers:
If this link works, here is a pix of the one you should be using. It fits right inside the tube, face up. http://www.westmarine.com/webapp/wc...nc=high_res.jsp&image=126219.jpg&desc=Mariner Dry Chemical Fire Extinguishers (in the pix, labeled PWC and has the red cap).
I believe it was $14 bucks. If the link above doesn't work, go to this link, it's their home page and once it opens, use their search engine for PWC fire extinguisher. It will open a link to several. The one you want has a read cap. http://www.westmarine.com/webapp/wc...oreId=10001&langId=-1&catalogId=10001:cheers:
Red one....?
No, if you have that extinguisher with the red cap pictured with that post above, it should fit right in, bottom first. If you notice, the diameter is the same all the way around, so nothing should hold it from fiting from the top or the bottom.:cheers:
No, if you have that extinguisher with the red cap pictured with that post above, it should fit right in, bottom first. If you notice, the diameter is the same all the way around, so nothing should hold it from fiting from the top or the bottom.:cheers:
- Status
