Shortedout96
New Member
A little back ground on my RXT. A bit over 5 years ago I stopped to eat a bite and had ski beached, got on it an realized it was under water more than it should be. Started it and got it to ramp and loaded it up. Got it home went to start it, not knowing start before water, hydrolocked it and popped timing chain (motor needed rebuilt anyways) also not knowing had jumped it at time with plugs out to pump water out of cylinders was a bad thing. Fast forward to now, rebuilt motor and put it in this weekend. Hooked everything up. Went to fire it and nothing, getting no spark to any of cylinders. I am getting fuel but seems odd that all the injectors spray at same time. I put a cam sensor in from buddies GTX made no difference.
So far I tried two sets of plugs
Different cam sensor
Checked voltage at connector to coil (12v Constant)
Did some pin checks at the ECU plug
No blown fuses Mpem
I do not want to buy a bunch of parts that won’t make a difference, tried searching web and various forums with not a ton of luck, also if there is anybody that is good with these near Farmington MO and I would be willing to pay them to look at it.
Thanks
Adam
So far I tried two sets of plugs
Different cam sensor
Checked voltage at connector to coil (12v Constant)
Did some pin checks at the ECU plug
No blown fuses Mpem
I do not want to buy a bunch of parts that won’t make a difference, tried searching web and various forums with not a ton of luck, also if there is anybody that is good with these near Farmington MO and I would be willing to pay them to look at it.
Thanks
Adam