hey guys.....i went to start the ski last night as i am planning to take it out in a couple of weeks.
when i put the dess in the tachos all work, i hear the two beeps, some sort of pump or motor and then as i try to start the engine it sounds like a bearing noise only....not even engine turning over.
potential problems i may have caused:
i have a third of a tank of fuel in the ski still from 4-5 months ago.
oil also for fuel mix.....not much tho.
i did put a trickle charger on the ski 2 weeks ago as the battery was dead.
new spark plugs but not sure of condition of leads
anyone have any ideas where i should start.....i am capable of using a multimeter so if there is someway of testing spark plug leads please advise.
otherwise the only other thing i could think if was fuel pump which i havent checked.
i have tested all fuses in front part of ski (FP, ACC, BAT....etc)
any help on this issue would be really appreciated......
thanks in advance
(also sorry for re-post i posted it before in the wrong area)
i have a video if that would help, just pm me and i will send
when i put the dess in the tachos all work, i hear the two beeps, some sort of pump or motor and then as i try to start the engine it sounds like a bearing noise only....not even engine turning over.
potential problems i may have caused:
i have a third of a tank of fuel in the ski still from 4-5 months ago.
oil also for fuel mix.....not much tho.
i did put a trickle charger on the ski 2 weeks ago as the battery was dead.
new spark plugs but not sure of condition of leads
anyone have any ideas where i should start.....i am capable of using a multimeter so if there is someway of testing spark plug leads please advise.
otherwise the only other thing i could think if was fuel pump which i havent checked.
i have tested all fuses in front part of ski (FP, ACC, BAT....etc)
any help on this issue would be really appreciated......
thanks in advance
(also sorry for re-post i posted it before in the wrong area)
i have a video if that would help, just pm me and i will send
