2002 utopia gauge cluster

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
02 Utopia Guage cluster not working
No lights, bilge, gas gauge, tac or fan, boat runs, all fuses good, is there a main fuse any ideas?
 
02 Utopia Guage cluster not working
No lights, bilge, gas gauge, tac or fan, boat runs, all fuses good, is there a main fuse any ideas?

Electric gremlins. You gotta love 'em.

In the driver helm compartment, there are fuse boxes that are sort of water-resistant.
You will need to check these and the condition of the connectors at each gauge and device that is not functioning.

Fuel gauge on these boats is a common failure. There is a tiny fuse built into the sender that fails. Maybe yours has not failed yet. Again- check all your connections. Check for voltage at your devices (like bilge pump). They do fail; especially on 20 year old boats.

Tach- at the engine, at voltage regulator. There are 2 reg's. The gray wire is the tach sender wire. Another connector. If still not working; swap the tach wire to the other gray reg wire.

No green connectors allowed.
 
Thanks for the advice I will start there. I also noted there is a 100 amp in line fuse in the engine compartment not sure off starter or solenoid will check that also.
 
Back
Top