When I first got this ski a month ago it had an active fault when I scanned it with my CanDoo Pro for the TPS sensors. I replaced both TPS, reset it and I am still getting a MAINT light but when I scan it with my CanDoo Pro now... I have no active faults.
It idles nicely but when I hit the throttle at about 2500 RPM the MAINT light comes on limiting my speed and RPM like limp mode, but when I get it out of the lake and scan it with my CanDoo Pro... there are no active faults or codes.
Any help would be appreciated.
New battery
New rectifier
New tps sensors
Fresh gas
Fresh oil
Voltage is good
Fresh plugs
It idles nicely but when I hit the throttle at about 2500 RPM the MAINT light comes on limiting my speed and RPM like limp mode, but when I get it out of the lake and scan it with my CanDoo Pro... there are no active faults or codes.
Any help would be appreciated.
New battery
New rectifier
New tps sensors
Fresh gas
Fresh oil
Voltage is good
Fresh plugs