• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1998 SPX won't start

Status
Not open for further replies.

Acr600

New Member
Please Help!!! I just bought a 1998 SPX that won't do anything, no beeps nothing. I have cleaned all the corrosion on all the cable checked all the fuses. I have a new battery. My ground looks good. When I jump the solenoid the motor starts so what could it be?? Thanks
 
I know you just stated it, but no beeps at all when you push the lanyard on the DESS post? There's a few things to check, continuity when pressing the start button, and 12 volts (yellow wire) going to the starter solenoid.

Possible the lanyard is not being recognized by the MPEM or the DESS post? Previous owners are known to get lanyards mixed up when selling a ski...you bought a non running ski, so it's bottom up process of elimination.. Go with the start button continuity and 12 volts to the solenoid as first checks.. Buzzer out is a possibility, easy to check, but a ski will start and run with it not working.
 
Status
Not open for further replies.
Back
Top