Hi guys, Im new to this forum but I have found the information invaluable so far.
I have just been to inspect a 1998 Seadoo Speedster with 2 110hp engines.Compression test resulted in 140psi in engine1 and the other was 149psi. I believe this is not bad?
My question is; As there is a difference in the psi ratings does this make a difference to performance?
We took it out to water but only in a no wake zone so I couldnt open the throttle to the last or near to it. As the psi's are reading over 140 would I be 'safe' enough? At leat the compression is good eh???
Appreciate any advice as I haven't a clue about boats and Im about to shell out $4k.
I have just been to inspect a 1998 Seadoo Speedster with 2 110hp engines.Compression test resulted in 140psi in engine1 and the other was 149psi. I believe this is not bad?
My question is; As there is a difference in the psi ratings does this make a difference to performance?
We took it out to water but only in a no wake zone so I couldnt open the throttle to the last or near to it. As the psi's are reading over 140 would I be 'safe' enough? At leat the compression is good eh???
Appreciate any advice as I haven't a clue about boats and Im about to shell out $4k.
Last edited by a moderator:


