• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1997 Sea doo Speedster oil tank grommet replacement

Status
Not open for further replies.

zzrich

New Member
Hello,
My oil tank is leaking oil from around the grommet at the elbow fitting at the bottom of the oil tank. I have a new rubber grommet but not sure how to remove and refit the grommet. Has anyone done this?
Thanks,
Richard
 
drain oil, remove elbow by twisting, wiggling, and pulling. it will be pretty tight. then remove grommet with dull screwdriver by prying out. assembly is reverse.
 
I replaced mine a few weeks ago. Left the tank in, but pulled the lines off the elbow, drained the tank, the twisted & pulled until it popped out. I installed the new one on the elbow and then into the tank. A little oil on the new grommet will ease in installation.
 
Status
Not open for further replies.
Back
Top