Is there a way to get the fuel to engine quicker?
I had removed engine, rebuilt, changed fuel filter.
There is a lot of hose between filter and carb..
Now all back in and cranks fine, I am afraid to keep cranking- that it will load up with injection oil.
Oil lines were primed..
Is it OK to keep cranking till gas gets to carbs..
Of course not continuously only crank for about 3-5 seconds at a time and take break, as to not overheat starter.
Thoughts?
Thanks in Advance...
I had removed engine, rebuilt, changed fuel filter.
There is a lot of hose between filter and carb..
Now all back in and cranks fine, I am afraid to keep cranking- that it will load up with injection oil.
Oil lines were primed..
Is it OK to keep cranking till gas gets to carbs..
Of course not continuously only crank for about 3-5 seconds at a time and take break, as to not overheat starter.
Thoughts?
Thanks in Advance...