Bought a 96 Spi last year round this time. Starts up fine and have rode it for a year including yday. Oil pools up in the bottom back portion of the pwc....a few days ago i shop vac'd it out and yday noticed there was a pool of oil back in the same spot. ANy ideas? im thinking oil lines, oil tank, or from the engine? The oil did pool up or leak without running the machine if that matters. Thx
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
1996 Spi oil leaking from somewhere
- Thread starter 96SPI
- Start date
- Status
Ckrawiec
Well-Known Member
Possibilities:
1) The grommet in the bottom of the oil tank is leaking.
2) the oil line connected to the bottom of the engine is leaking....hose clamp may have cut through the line
3) the oil pump is leaking
4) the oil tank is cracked...check the seams
5) an oil line is cracked/split...check the small lines from the oil pump to the engine block below the carbs (if original (still have factory paint on them)...replace them anyway...3/32" tygon tubing
5) the engine case is cracked
1) The grommet in the bottom of the oil tank is leaking.
2) the oil line connected to the bottom of the engine is leaking....hose clamp may have cut through the line
3) the oil pump is leaking
4) the oil tank is cracked...check the seams
5) an oil line is cracked/split...check the small lines from the oil pump to the engine block below the carbs (if original (still have factory paint on them)...replace them anyway...3/32" tygon tubing
5) the engine case is cracked
- Status
