Shanker
Member
Hello Everyone,
Have a 96 GTX that I purchased from a dealer, ski only has 58 hours on it, The ski was running when i picked it up, they programmed a key for me and I confirmed it does turn on the machine, both are reading 150 so that is good. The couple things that were bad with the ski was the fuel lines, instrument and the welch plugs, I installed new fuel lines, filter, fuel shutoff/reserve welch plugs were welded in, fixed the instrument has been fixed with a new film, flushed out old oil and filed everything up, new battery and went to fire the unit up and its dead?.
I have checked all fuses and all are metering OK, I have jumped the solenoid just to make sure and I have the stater and engine turning over. I know it's a wiring issue but how does the whole system work.
DSS key goes in and energizes the system on and then turns on the rest of the system?
does the display cluster have DSS control or does it go directly to the grey box in the front.
Any help would be great to try and trouble shoot this. My son was so excited that we finally have everything put back together just to have a dead ski now.
Thanks in advance.
Steve
Have a 96 GTX that I purchased from a dealer, ski only has 58 hours on it, The ski was running when i picked it up, they programmed a key for me and I confirmed it does turn on the machine, both are reading 150 so that is good. The couple things that were bad with the ski was the fuel lines, instrument and the welch plugs, I installed new fuel lines, filter, fuel shutoff/reserve welch plugs were welded in, fixed the instrument has been fixed with a new film, flushed out old oil and filed everything up, new battery and went to fire the unit up and its dead?.
I have checked all fuses and all are metering OK, I have jumped the solenoid just to make sure and I have the stater and engine turning over. I know it's a wiring issue but how does the whole system work.
DSS key goes in and energizes the system on and then turns on the rest of the system?
does the display cluster have DSS control or does it go directly to the grey box in the front.
Any help would be great to try and trouble shoot this. My son was so excited that we finally have everything put back together just to have a dead ski now.
Thanks in advance.
Steve