• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1995 gtx electrical problem

Status
Not open for further replies.

Rosstree

New Member
Ok...So I've replaced the starter, starter solenoid, the mpem, the start/stop switch, and the kill switch. I solved my starter problems. Now I have no spark at the plugs and the gauges will not come on either. Can anyone give me some advice?
 
Check all the wire connections and fuses. Did you replace the correct MPEM? That could be you problem if it is a different unit than the original. If it is the correct one, it has to be a wire connection. Check all your grounds too. Corrosion hides in the connections.

Karl
 
12v light test, the wire at the coil, if it dont lite up, then i'd say, either ground issues, or stator issues. While ur at it, why not replace the stator coils, you've replaced everything else, plus, I have the coils, new in package..:rofl:..j/k, bro..but if need coils, i got them.
 
Status
Not open for further replies.
Back
Top