hotrodssnova
Member
I decided to pull the carbs on the port side engine and clean them out. It stalled out on me and i have never cleaned this side. I noticed that the return line on the pto carb is non functional. this does not seem right, and i need some one with a spare carb to verify.
The 90* elbow will not flow air, nor can I push a wire thru.
any insight? should I drill it out? What size?
It does appear to have been replaced at some time. The cover has newer paint than the body.
The 90* elbow will not flow air, nor can I push a wire thru.
any insight? should I drill it out? What size?
It does appear to have been replaced at some time. The cover has newer paint than the body.