1992 seadoo start probluem

[krhogger96]

hello can some one help please my 1992 seadoo xp ran great for 4 days than sat overnight had to disconnect mpem from coil to start ran great than the same thing the next day any ideas thanks

 

[Bills86e]

Check the module relays : #12 Relay = turns things on & off.
http://partsfinder.onlinemicrofiche...o_oem/Seadoo_PWC.asp?Type=18&A=8&B=8&Action=O

 

[krhogger96]

thanks i will try that

 

[krhogger96]

1992 seadoo start problem

well i switched out both relay to make sure i did the right one still no spark i did not disconnect mpem from coil i know i would get spark then can it be a problem with stop switch it looks like the wiring runs through laynard switch is there a way i can disconnect only stop switch to isolate that switch thanks for the help

 

[Bills86e]

Its wires run down thru the steering column I believe there is a disconnect above the gas tank where the wires come down thru steering. You can disassemble the clip if you need to pull the wires out thru top, just attach a fish so as to pull down the new switch wires. Radio shack sells a .097 pin pusher-outer about $8.
http://partsfinder.onlinemicrofiche.com/seadooforums/Seadoo_oem/Seadoo_PWC.asp?Type=13&A=8&B=7

Bills86e