Hi all,
I’m stumped. I got a 92 GTX cheap from a buddy. So far I have put in a new starter, MPEM box (just the black one with 10 ish wires), ignition coil, and plugs.
Originally, I had spark to one wire. Trimmed both back and tried again but no luck. Ordered a new ignition coil, now I had no spark in either. Replaced the MPEM and still no spark. Checked the wires and everything looks ok but I’ll attach a picture too. Cranks over just fine but won’t start due to spark. Fresh gas in the tank and a little oil in the cylinders to make sure I don’t seize it lol. Let me know if you have any thoughts.
Also, I tested the voltage from the positive ignition coil wire and it seems to be only around 6v.
Thanks,
Jake
I’m stumped. I got a 92 GTX cheap from a buddy. So far I have put in a new starter, MPEM box (just the black one with 10 ish wires), ignition coil, and plugs.
Originally, I had spark to one wire. Trimmed both back and tried again but no luck. Ordered a new ignition coil, now I had no spark in either. Replaced the MPEM and still no spark. Checked the wires and everything looks ok but I’ll attach a picture too. Cranks over just fine but won’t start due to spark. Fresh gas in the tank and a little oil in the cylinders to make sure I don’t seize it lol. Let me know if you have any thoughts.
Also, I tested the voltage from the positive ignition coil wire and it seems to be only around 6v.
Thanks,
Jake
