• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

140MM pump wedge

Status
Not open for further replies.
C

Codylee

Member
i know these are extremely hard to come by and when I purchased a speedster with fairly bad bow porpusing I decided to make my own. It would have been hard to put trim tabs on a twin 787 (not much room) plus I didn't want to drill into the hull. Anyways I measured my pump over and over again and 3D printed probably 10 until I got the perfect fit. All and all I'm extremely satisfied with the way it handles now. No bow bounce. Rides great! Also put one on my 96 xp top speed gained maybe 1-1.5. Anyways I figured there was others like me who could use a wedge for the 140mm pump. I ran a listing on eBay if anyone is interested
 
I like that, not sure what one I would need but I'm interested in a few. let me do some reading up on these
 
I have one of the originals laying around in my parts bin, been meaning to try it. Is it true you need longer bolts for the bottom holes?
 
MPower said:
What mods do you make to the rod and nozzle?
Click to expand...
Adjust it shorter and you need to clearance the top of the nozzle so it doesn't bind up. The guy I ride with had it, his son did it years ago. If I can find the video on YouTube I'll post it.
 
Status
Not open for further replies.

Similar threads

R
  • Locked
2000 XP bogs / surges at high rpm
Replies
3
Views
1,085
RC951
R
S
  • Locked
Engine Binding After 140mm Pump Rebuild (95 GTX)
Replies
6
Views
755
etemplet
etemplet
crankygypsy
FOR SALE SOLD 2008 SeaDoo Challenger 180
Replies
2
Views
1,213
crankygypsy
crankygypsy
C
  • Locked
Pump wedge for porpusing
Replies
0
Views
759
Codylee
C
C
  • Locked
Seadoo 140mm 3.5 degree wedge
Replies
1
Views
559
Matt Braley
Matt Braley
Back
Top