07 rxt starter silinoid replacement

[keca]

How do you replace the starter silinoid...can't find the nuts or the bolts to remove ...looks like you have to take off the whole fuse box assembly....HELP

 

[ski-d00]

It sits in a plastic clip housing, press the tab and it will slide out after you unbolts the 2 10mm red power cables.

 

[keca]

It sits in a plastic clip housing, press the tab and it will slide out after you unbolts the 2 10mm red power cables.

Yes ..you are exactly right...I got up this morning and fooled with it ...I was looking for the nuts and bolts because the pics for the replacement silinoid has the 2 holes for mounting...I got it off and now waiting for new part ... the new one has a thicker mounting flange .... I wonder if it will slide under the plastic mounting plate ... thanks so much ....

 

[keca]

Okay,,stop,,i believe,,,it should be bolted to the side of the fuse module,,,it is securred with 2,,,10mm nylok nuts,,,the top one is easy to access,,the lower one is out of sit,,,,you will need a 1/4 drive ratchet, and short extensions,,,there are washers below the nuts,,they usually fall into the hull,,,no biggie,,,remove the positive starter cable at the battery first,,,that will help to free up the selenoid ,,,remove the 2 fuse holders from their posts,,,...this will allow you to bring up the selenoid to a way more manageable position.,,,hope this helps..

THANK you for responding...not on this model...I figured it out