06 4tec challenger motor install

[CURT7TY14]

Hey everyone i recently acquired an 06 challenger with the 215 4tec. The motor needed 2 new oil pumps and a supercharger rebuild. Going back together now is there any threads about engine install and hooking everything back up? I bought it with the motor out. Looking for a checklist and help to make sure it goes back together seamless! Thanks

 

[nfdmedic]

I just rebuilt a 05 RXP replacing the block (blown motor) if you look at all the plugs I believe they are all unique sizes and will only fit where they belong. Be sure to get an engine alignment tool to align the drive shaft. Have you checked the exhaust valves to make sure they are not the bad valves? (Series 72) if so rework the head while you have the engine out. I found 5 of the 12 valves were slightly bent in mine and I replaced all the exhaust valves with the newer version. (older ones are prone to break) I think the engines are the same in mine. If you need any pics about how to run the wiring let me know.