05 RXT puking oil through breather

[Qveon]

Ok so if the oil level is normal on the dipstick before I start it and then start it, it will usually idle ok after a little bit start spitting a little oil out. After a couple small revs it puked oil out of the breather and in 5 minutes the oil pressure warning is screaming...

I took the Oil Sep solenoid valve apart, it is working correctly. The hoses are hooked up correct. And all the oil is in the hull. Compression is 130 in all. I need some help and ideas please.

 

[Coastiejoe]

Generally, to get oil into the breather area you have a piston or ring issue. What do the spark plugs look like? Nice and clean or oil fouled?

 

[Qveon]

When i pulled the plugs they did not have oil on them.

 

[pwgsx]

What breather are you talking about? Can you post a pic showing where the oil is coming out of? Thanks

 

[Qveon]

The red circles is where it leaks from

 

[pwgsx]

So you must have pressure in your valve cover, when it starts doing this, remove the oil fill cap and see if pressure releases. Usually oil comes out of the valve cover gasket along with pressure escaping, I have not heard of it coming from the actual hose that you have circled.

 

[Qveon]

The solution was that who ever worked on it previously installed the scavenger oil pump shaft backwards so it wasn't even pumping... Turned the shaft around and all good... Then the supercharger broke, heh.