redraider2011
New Member
just had a new 951 put in my rx, the shop did most of the break in in house, so i took it to the lake just to play around and took it relatively easy. ran it for a good hour and a half and the ski seemed to lose a little power until it finally bogged and i shut it down. figured it was the plugs so i changed them but now it will only rev to 4k... when in reverse/nuetral area it will run up to 6k no problem. one other thing, the water in the bottom of the hull was milky, the ski also had a brand new oil pump installed, any ideas?
