01' RXX help, water line routing

[bigredjetski]

Hey guys need some help! Got thrown under the bus here, got a 01' rxx came in with a new engine in a box and all the hoses and engine pieces in the hull. Im an automotive tech and have a GP1200r ski so i said sure il try to put it together....well long story short i got most of it figured out except the water lines! Ive looked online for hours and cant come up with anything! Does anyone have a nice pic or manual pic of the routing of the hoses? Thanks a ton Josh

 

[1of500]

go to the parts micro fiche for the rxx its in there

 

[racerxxx]

 

[1of500]

Water lines are easy, getting the pipes in is the pain in the ass. The orings where the pipes join should be replaced. Inspect the two header pipes for hairline cracks at the flanges where it bolts to the block. You have to install the carbs before the rear header goes on. I would pressure test the pipes while they are out. Red loctite on the bolts for the header pipes.

Sent from my VS985 4G using Tapatalk

 

[1of500]

Oh and use oem gaskets if not you will wish you had

Sent from my VS985 4G using Tapatalk

 

[bigredjetski]

sweet this helps, thanks guys