00 rx cutting out at high rpm

[Cstang50]

I'm just going to do a stock rebuild. I'm looking into the wsm crank

 

[ORION '95 Speedster]

Looks like you can get a rebuild kit for your crank for $199, or a complete crank for $449. Free shipping.

 

[1of500]

I'm just going to do a stock rebuild. I'm looking into the wsm crank

Look on Powersportsparts4less.com you can get an oem reman crank for less than wsm

 

[1of500]

Send the counter Balance to crank works for rebuild it isn't much

 

[mikidymac]

Looks like you can get a rebuild kit for your crank for $199, or a complete crank for $449. Free shipping.

These cranks are not something you can rebuild yourself.

 

[ORION '95 Speedster]

I would imagine that you would need to press the bearings on.



http://www.ebay.com/itm/New-Sea-Doo...ash=item2eed823f7d:g:hbYAAOSwud1W~qC8&vxp=mtr

 

[1of500]

I would imagine that you would need to press the bearings on.



http://www.ebay.com/itm/New-Sea-Doo...ash=item2eed823f7d:g:hbYAAOSwud1W~qC8&vxp=mtr

It's not just that the crank has to have perfect orientation and be straight.

 

[Cstang50]

Look on Powersportsparts4less.com you can get an oem reman crank for less than wsm

thanks. im going to go threw them they seem to be the best seal so far for one.

 

[jhjesse]

WSM cranks are good. Before you buy I would look at an OEM crank as well. For about the same money you can take your old crank to a Sea Doo dealer and exchange for an OEM crank.
Either way you should be good.

 

[mikidymac]

WSM cranks are good. Before you buy I would look at an OEM crank as well. For about the same money you can take your old crank to a Sea Doo dealer and exchange for an OEM crank.
Either way you should be good.

I think he is using Power Sports Parts 4 less and they are a seadoo dealer.

 

[Cstang50]

I think he is using Power Sports Parts 4 less and they are a seadoo dealer.

Yes I'm going to go threw them. Should I replace my counter balance crank too??

 

[1of500]

Yes I'm going to go threw them. Should I replace my counter balance crank too??

I would send the counter Balance to crank works for rebuild a

 

[mikidymac]

If nothing else have it rebuilt. I would not trust the balancer bearings or seals after seeing what your cases looked like.

 

[Cstang50]

yeah that is what i was thinking. im not trying to do this again any time soon

 

[Cstang50]

I would send the counter Balance to crank works for rebuild a

i will look into them. thanks for all the help