I grew up in Flushing.... where do you ride in the area?? Lake Fenton? My family still lives in the Flushing area and thought about bringing it down sometime to go play around the area.
Nick
I have a 2014 GTX Limited iS 260. Anything to do with a iS model is not fun. Usually results in removing the top. Last year I paid to have it winterized and I can tell they never removed the hose because of how the hose clamp is positioned.
After searching all over different forums and...
Start with plugs. I had a dead spot feeling in the throttle when hardly pulling it. Replaced plugs what book called for and took care of the problem and noticed better overall throttle response.
You are asking for alot of measurements on these tools. It would be easier to just order them on eBay.
529036168
529035819
529035955
You can get the OEM ones for a very decent price.
The SCOM is not as hard as it looks. Very simple to do. I put one in last week and it was a walk in the park. If you have any questions, it's still fresh in my head where I can help you out.
Nick
I could be wrong, but I do not think the stainless is going to 'shrink' any.
I just purchased a new jet pump housing, solas stainless wear ring, and impeller. Today I inserted the wear ring into the housing and it was tight. I was barely able to rock it. I tapped on it lightly with a rubber...
The joys of a iS model. Remove upper deck for a majority of work. It's not a pain, just more of a inconvenience. Installed the power filter kit along with the thru hull exhaust.
I'm sure it varies from state to state. You should be fine to go from point A to point B with no troubles as long as your insured. I don't think you could get away with a bill of sale for 30 days.
Color is Anthracite... BRP Code: B-181. PPG paint code: 935098
I have the same color and purchased a patch paste kit from Spectrum Color, however, I'm hesitating on using it since the Anthracite is metallic and when sanding the paste I'm afraid of damaging the metallic flakes. The...