Recent content by JoshuaDuncanCT

There's no way to repair those gauges you have to replace it and also bring it to a dealership so they can program the cluster with the ECM

There's a Telltale sign whether the motor is actually overheating if you can hold your hand on the exhaust at idle with the water running then the motor is not overheating and it's the sensor if you cannot hold your hand on the exhaust manifold directly against the head there is a clog in the...

First thing I would do is check the connector on the back of the cluster and make sure there is no moisture or water in the connector

If it continues to say reading key and means that it is not sensing anything on the D.E.S.S. post maybe a bad post or bad connection

Hi I'm Joshua from Stamford Motorsports we're not too far from New Rochelle and located on 177 Greenwich Ave Stamford Connecticut we are Sea Doo certified.

Word of advice do not remove any Bolts from the motor that is just a vent line that goes straight into the rubber tube that comes from the air box to the intake it's not a big deal if it comes off just put it back all it's doing is venting crankcase pressure back into the intake so that it does...

If the unit is supercharger supercharger must be rebuilt at 100 hrs and it's a good idea to inspect the wearing an impeller

You would have to go to a certified Sea-Doo dealer and have them clear it and or check the fault code