• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Where should this cable go?

Status
Not open for further replies.

Norb

New Member
Hey guys,

This two connectors where unplugged by the fuelpump, I found where to plug the connector that is going from left fuelpump but the right I cant find a plugger to plug it into, I checked everywhere, should this one be unplugged?

Its a speedster 200, 155hp, 2007 boat.

Picture.
http://www.hideplate.com/plugger.jpg
 
Thats the fuel guage plug going to the other fuel pump/ guage. If you look on the other sending unit/ fuel pump assy it has the same plug, but it is plugged in. Seadoo uses the same type sending unit/ pump for both engines, 1 for each. If one goes bad just unplug it and use the other fuel sending unit plug. You only need 1 fuel sending unit, but it comes with 2 complete assy.

Karl
 
Last edited by a moderator:
Okey great, then everything is correct, Ill just wrap the extra one in some tape. :cheers:

Thanks!
 
Status
Not open for further replies.
Back
Top