VTS (end position) blows 5a fuse

[Moake90]

Hi all,

I tought I fixed my VTS using the 451M relais. It works but I don't have any indication on the gauge and the 5a fuse blows when it is in its end positions.
Online I read that the 7,5a should blow when there are issues with the VTS. Is this correct?

So what causes the 5a fuse to blow in my case? I've already replaced the diode in the MPEM.
I also assume that the magnet that detects the end positions is bad right?

Thanks,
Armand