VTS 451 Relay - No display why

[rkkoeb]

So I installed a 451 relay today for my VTS but now i have no dislay showing the location of the nozzle on the dash. Before I started I had the nozzle set in the center and my displayed also showed it in the center. No nothing. I followed this setup.

 

[Mraw]

There are two brown wires comming from the VTS that go to the 6 pin connector, did you reconnect those?

 

[rkkoeb]

I didnt remove any connectors. I am going to play around with it tomorrow. Questions if I push the UP button all the way which way will the pump bucket face? Up or down

 

[rkkoeb]

Bump

 

[Mraw]

Bucket will face up. Are you sure the 2 brown wires from the VTS housing are still connected?