TAS - Testing

[water_scooter_joe]

14' Sea-Doo Spark

Issue: can't get over 2500rpm
3 fault codes related to TAS

Checking to see if the sensor is bad: What pins on the sensor do I measure resistance?

 

[water_scooter_joe]

14' Sea-Doo Spark

Issue: can't get over 2500rpm
3 fault codes related to TAS

Checking to see if the sensor is bad: What pins on the sensor do I measure resistance?

If you're back probing on the steering wire harness connector that feeds the sensor, you're checking the wiring, correct? How is that checking the sensor? I would think that if you're not getting power to the sensor the problem would be elsewhere