Speedster '96 Starting Issues

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

MLutton22

New Member
All right so port side engine fires up fine. Starb side not so much. I get a click coming from what seems like the solenoid when when pressing the starter switch but not indications from the starter. Tried jumping the solenoid, no sparks what so ever. Took a shot in the dark and replaced the solenoid and no luck. So far, I've checked the plug into the solenoid and it's showing ~12v. Any tips on what to look for/ check at this point before turning it over to a shop? Thanks!
 
Status
Not open for further replies.
Back
Top