• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Solas 16/23 SD-SC-X for stock 717?

Austin69

Premium Member
Premium Member
I know pitche measurement can be different for different companies and Solas graph says 16/23 for stock 717 jetboats but on the 717 pwc is says the normal 14/22. Could it be a mistake? If not that ill go with 14/22 concord unless someone has a better one!
 

Attachments

  • IMG_0957.png
    IMG_0957.png
    912.9 KB · Views: 2
  • IMG_0958.png
    IMG_0958.png
    616.1 KB · Views: 2
The PWC chart lists them both for your model. They are two completely different impellers so the pitch will not be equivalent.
What is wrong with your stock impeller?
 
I put an "X" impeller on a 587 SP with a Factory pipe. I went for a ride on the ski after doing some work and it bogged really bad in the turns. I thought it had carb issues but i swapped the impeller back to the one previously installed. Ski performed GREAT!! The "X" was too aggressive. Personally I wouldn't chase an impeller. At best you may be 1-2mph out of an aftermarket but you'll loose someplace else. The best way to make a 587 fast is to get a 947. :D
 
Back
Top