I know this is the pwc side of the forum, but it is engine related.
I have a 2008 seadoo challenger 230 with twin 215s
It was running fine all day yesterday. Then the last ride out it wouldn't idle very good.
This morning I went to use it and it won't start.
Changed plugs, even though they still looked good.
Swapped coil packs between the engines, still no good.
It will start if I mess with the throttle when someone turns it over. It runs like crap and will die if I let go of the throttle.
While running I unplugged a coil pack one at a time to see if it was just one cylinder. The engine will die no matter what plug I disconnect.
Looking for ideas as the boat is a 3 hour drive to a dealer.
Thanks.
I have a 2008 seadoo challenger 230 with twin 215s
It was running fine all day yesterday. Then the last ride out it wouldn't idle very good.
This morning I went to use it and it won't start.
Changed plugs, even though they still looked good.
Swapped coil packs between the engines, still no good.
It will start if I mess with the throttle when someone turns it over. It runs like crap and will die if I let go of the throttle.
While running I unplugged a coil pack one at a time to see if it was just one cylinder. The engine will die no matter what plug I disconnect.
Looking for ideas as the boat is a 3 hour drive to a dealer.
Thanks.
Last edited:
