• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Seadoo hull taking on water ...Oring?

Status
Not open for further replies.

speedyporsche

New Member
So i just bought a used 2004 seadoo GTX supercharged. Took it out today and it was taking on a lot of water in the hull and engine compartment. Like filled up a good 1/3 of engine compartment in about 1 to 2 hours while just setting in water (tied off to another boat). Had to bail it out twice. When we go it out, one of the drinanplugs was missing and oring, the other was split. Would this cause the seadoo to take on water that fast?
Thanks
 
So i just bought a used 2004 seadoo GTX supercharged. Took it out today and it was taking on a lot of water in the hull and engine compartment. Like filled up a good 1/3 of engine compartment in about 1 to 2 hours while just setting in water (tied off to another boat). Had to bail it out twice. When we go it out, one of the drinanplugs was missing and oring, the other was split. Would this cause the seadoo to take on water that fast?
Thanks

ok, just to clarify, that was supposed to be a drain plug was missing "an" oring, not that the drain plug and oring were missing.

Both drain plugs were screwed in tightly just one without an oring.
This would still cause it to fill up that fast?
Hopefully its that simple of a fix.
 
Status
Not open for further replies.
Back
Top