Seadoo 951 white pipe

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Mraw

Well-Known Member
Just got a 951 white pipe and manifold. I have been pondering putting it on my main ski or waiting until I rebuild my xpl. Questions

1. How will this pipe affect reliability?

2. What changes to carbs will needed to be made?

3. Any other advice?
 
Hey Mraw,
will you be putting the white pipe and manifold on a silver 951? I have a sportster LE and I'm looking for some performance upgrades is this a viable option for a boat?
 
Will be going in a silver 951. From my understanding from another form I should be able to just bolt it on and go. As for boat performance there would be an improvement but I'm not sure how noticeable it would be in a boat
 
Just got a 951 white pipe and manifold. I have been pondering putting it on my main ski or waiting until I rebuild my xpl. Questions

1. How will this pipe affect reliability?

2. What changes to carbs will needed to be made?

3. Any other advice?
High Speed Jets: 167.5
Low Speed Jets: 85 with Accel Pump / 95 without Accel Pump
Pop Off: 20 psi
High Speed Needles: 1/4 Turn Out (Stock is 0)
Low Speed Needles: 1 & 5/8 Turn Out (Stock is 1 & 1/2)
Needle & Seats: 2.0
Remove stock air box. I run the Blowsion Tornado Air Filters
 
Status
Not open for further replies.
Back
Top