markster11
New Member
I had my 2005 RXT in some big waves and now have moisture beading inside the LCD panel. Is there any way to get rid of this moisture? I thought this was sealed.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
RXT LCD Panel Moisture
- Thread starter markster11
- Start date
- Status
Sealed ....
They are sealed with an inert gas, to keep the moisure out from between the glass.
I saw a fix for this in one of the sites I visit when I do research. Let me poke around and I'll re-post here if I can find the site with the fix......:cheers:
O.K..........I thought I saw this. Follow this link....... http://www.seadoosource.com/ and scroll about half way down the page, looking on the left hand side where he has all the descriptions as to what he has to offer. You'll see where he states he has a fix.........Good luck!...
They are sealed with an inert gas, to keep the moisure out from between the glass.
I saw a fix for this in one of the sites I visit when I do research. Let me poke around and I'll re-post here if I can find the site with the fix......:cheers:
O.K..........I thought I saw this. Follow this link....... http://www.seadoosource.com/ and scroll about half way down the page, looking on the left hand side where he has all the descriptions as to what he has to offer. You'll see where he states he has a fix.........Good luck!...
Last edited by a moderator:
markster11
New Member
Thanks...but,
Thanks for the site, lots of interesting info there. However, the fix I found there was for sun damaged guages.
My guage panel is now fairly full of moisture beads. Do you think this would be repairable? I'm bummed!
Thanks for the site, lots of interesting info there. However, the fix I found there was for sun damaged guages.
My guage panel is now fairly full of moisture beads. Do you think this would be repairable? I'm bummed!
- Status
Similar threads
