Pulling tube with 3d

[ThreeD]

Anyone tried pulling someone behind their 3d? Just curious how and if it will work.

 

[D 5UPE]

The tie down loops are too low. Plus the law says you must have a look out sitting behind you. Never tried it. Cant see any point in doing it.

 

[ThreeD]

I know, I just figured that most people don't obey the law anyway, so I thought I'd ask if anyone has done it. What if you tie the rope around the base of the moto seat pole? What you've never gotten 2 people on your 3d?

 

[Octane103]

I've pulled a tube behind the 3D many times (SeaDoo "X" towable to be precise). I use a harness that attaches to both tie-down points and then clears the jet pump.

If I am not mistaken if you have a mirror you aren't required to have a rear-facing passenger. Please correct me if I am wrong (I live in Florida). I've attached an inexpensive yet removable mirror to my handle bar when towing.

My ski, she's a 2004 3D RFI. I purchased the first one delivered to Florida.

 

[ThreeD]

NICE! I knew that there had to be someone who tried it. I'm not sure on that rule in WA ST though. I thought for sure you had to have an extra rider to watch the tube....Kick ass if that is not the case and a mirror will do. anyone else got any rules for this kind of thing?

 

[nik282000]

I have towed a 2007 sea doo wake with mine (it died out in the lake) but I wasn't really aiming for speed. The 110hp motor still had no problems doing it. I made a Y in the rope to the 2 loops and then a third rope to the seat post to keep it all away from the jet. I had t MacGyver it because we were out from shore.