L Leeboy163 New Member Jul 21, 2020 #1 So I cleaned my carb and when I put it back when ever I press the throttle it goes up but don’t come down unless I push it
So I cleaned my carb and when I put it back when ever I press the throttle it goes up but don’t come down unless I push it
mikidymac Moderator Staff member Moderator Jul 22, 2020 #2 Make sure you have the oil pump arm spring wound the correct way. It is possible to have it wound the wrong way putting no return tension on the arm.
Make sure you have the oil pump arm spring wound the correct way. It is possible to have it wound the wrong way putting no return tension on the arm.
R ryan bennett New Member Jul 23, 2020 #3 This happened to me yesterday. I took the two allen screws out of the pump, removed it and re-seated the spring in the correct place (there is a small notch that it will hook to). You might have to mess with it for a bit to get it seated. Attachments New Project (9).jpg 69.3 KB · Views: 10
This happened to me yesterday. I took the two allen screws out of the pump, removed it and re-seated the spring in the correct place (there is a small notch that it will hook to). You might have to mess with it for a bit to get it seated.
mikidymac Moderator Staff member Moderator Jul 23, 2020 #4 And you don't have to remove the pump to get the spring back on the arm.
