Need a new carb SBN 38

[XPorDIE]

Anyone know where I can purchase a NEW SBN38 for my 1996 GTS?

 

[mikidymac]

OSD seadoo.

 

[XPorDIE]

OSD seadoo.

I looked on their website and it looks like they don’t sell any? I see 40mm and 44mm but no 38? Am I missing it ?

 

[Ckrawiec]

Just found an advert for BN-38 on Amazon.

Why new though? Can't rebuild the one you got? or its missing or FUBAR....just curious

 

[XPorDIE]

I rebuilt this sob 2 times and still can’t get it to run good in the no wake zone, loads up while it idles then have to work your way up past 1/2 throttle , then you’re good to ride, but come to a stop and it loads up and have to build up to throttle without killing it . My pop off psi is 37 with a brand new needle and seat, high screw at 0 , low at 1-1/4 . Stock jets . 1996 seadoo gts

 

[XPorDIE]

I rebuilt this sob 2 times and still can’t get it to run good in the no wake zone, loads up while it idles then have to work your way up past 1/2 throttle , then you’re good to ride, but come to a stop and it loads up and have to build up to throttle without killing it . My pop off psi is 37 with a brand new needle and seat, high screw at 0 , low at 1-1/4 . Stock jets . 1996 seadoo gts

Also tried low speed at 1 and still same results

 

[mikidymac]

Email OSD.

 

[XPorDIE]

Well I contacted osd, they don’t have any, neither does wsm or sbt. Not sure what other options I have . Guess I will rebuild this carb again maybe there is something that I missed

 

[mikidymac]

You could get a clean used one from Westside Powersports Seadoo.