val-e-vue
Active Member
I have a pair of 99 GTX Limited skis with the 951 engine. I'm in the middle of rebuilding them since both had blown engines. In the process of rebuilding carburetors I've found an anomaly with the injectors. The shop manual provides a test for the injectors, that involves connecting a pump to the injector and pumping it up until it releases. It should release around 13 psi. One of mine does exactly that and the others all release at 3 psi. Below I have included a couple photos 1) The injector 2) My test setup.
I have video of the test but I'm new here and you need to have three posts before you can post a link.
My question is: Are the injectors serviceable? If so what is the proper way to remove and disassemble. The test is covered in the shop manual but there are no service instructions. I have also looked at Mikuni document for the BN44 and it was not covered. I don't want to break anything
Thanks!!
I have video of the test but I'm new here and you need to have three posts before you can post a link.
My question is: Are the injectors serviceable? If so what is the proper way to remove and disassemble. The test is covered in the shop manual but there are no service instructions. I have also looked at Mikuni document for the BN44 and it was not covered. I don't want to break anything
Thanks!!