Low speed screw turnout

[Ckrawiec]

My apologies if this is a silly question....BUT......when you say "turn the LOW speed screw OUT 1 turn":....what does that REALLY mean???

The low speed screw has a T handle on it...is 1 turn OUT a 180 degree turn (1/2 twist = 1 turn of the handle) OR is 1 turn OUT a full 360 degree turn (1 full twist = 2 turns of the handle)?

I would assume 1 FULL turn OUT is a full 360 degree turn of the handle....but I don't want to assume. Thanks for any clarity, much appreciated.

 

[AKnarrowback]

A full 360 degree rotation from the seated position.

 

[mikidymac]

It helps to put a line of paint or even whiteout on one side of the tee handle so it’s easier to see one full revolution.

 

[Ckrawiec]

Thank you Gents......that's what I would have thought is logical...but you never know unless you ask the question....thanks for the clarity!
Carbs are finally going back into the machine this week (the weather is turning for the better in NYS, so time to get the old girl ready) and then we see if she'll "cooperate"... on the trailer at least. On the water is ALWAYS a "different" story...., but my water is 3 hours away so we shall see soon enough!!!!!