Looking for a deck hinge for a challenger 1800

[Flightfollowing]

Im looking for a deck hinge for my Bimini top off of my challenger. Im not sure what brand the bimini top is but the parts have a Master tool logo on it. The acutal part itself has no logos or anything, I cant find out where its from or where to buy it.

pics.

dimesions are 2 3/8 long 3/4 wide and at the tallest height 1 3/4 and at the shorterst height 1 3/8

 

[RFoster130]

You can find em on ebay for a couple bucks. I may even have a spare. I'll look at home.

 

[RFoster130]

I have used several different brands and the holes were always in the same place. Here is a cheap one.

http://cgi.ebay.com/ebaymotors/5006...at_Parts_Accessories_Gear&hash=item255ead53e0

If you insist on it being for a sea doo, try this one. Its $38 vs $5

http://cgi.ebay.com/ebaymotors/2-SE...Personal_Watercraft_Parts&hash=item1e56f3e13a

 

[wildone72]

you should be able to pick that up from just about any boating supply store.

 

[Flightfollowing]

I bought an angled one and a straight one. It just doesn't fit right. Im looking for one that has the wedge style that i posted in the picture. I cant find it anywhere. I've been using ebay and google to search and I've gotten no hits.

 

[RFoster130]

I've used both. The OEM cover came with the angled ones. I already had the flat ones on the boat so i used them. The plastic bends and conforms just fine. You really wont notice much difference. Just buy 2 and do both sides.