Launch issues Seadoo 720 1999

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
Thank's :) I Have order the part and i'm waiting for it
I'll be back to test the new part

Thank's for your help
 
A small question please answer,
I have changed the dess post and I'm earing the 2 shorts beep but when I push stars they're is nothing.

The oil light is lighting. Can this light prevent the watercraft from starting?????

The old owner said to me that the oil pump have been shut down (for doing the mix himself)
 
2 beeps means that the computer recognizes the lanyard and is ready to start.
So you have either a bad battery, starter relay or starter on cable connection.

Oil light will not stop it from starting ans it is just an idiot light.

You still have to supply the engine with oil from the tank even using premix on these engines. Hopefully he did that correctly.
 
Thank you for the quick answer

The battery is new I have buy it 1 month ago and charged with my charger

How can I test the starter or starter relay?
I ear nothing at all when I push START button

Yes he said me to let oil in the tank, yeah a good thing for me


Thank you very much
 
Jump the big copper posts of the starter solenoid with a screwdriver. It will spark and startle you but it sends 12V directly from the battery to the starter to verify the starter and cables are good basically bypassing the solenoid.
 
Thank you, when I jump the starter solenoid with a screwdriver, the starter start. the starter is okay

The fuse in the electrical box is good too

So it's the starter relay that doesn't work?
 
More than likely but I would still see if any voltage is being sent to the solenoid on the little wires that trigger it to be sure.

The solenoids anr fairly common to go and the cheap aftermarket ones are hoit or miss. I would suggest a reputable supplier, not just the cheapest you can find on ebay.
 
Hello my friends!
I'm happy to post this picture because the launch issue has been solve !
It was the dess post and the solenoid. The seadoo start at the first try!
Thanks for your help!
 

Attachments

  • Screenshot_20200405_143127.jpg
    Screenshot_20200405_143127.jpg
    270.4 KB · Views: 7
Status
Not open for further replies.
Back
Top