Just saying hi

[ssmedt]

Just wanted to say hi. My name is Kevin and I live in Lawrenceville Ga, I am new here but not new to forums. I am very active on a GMT-360 forum by the same member name. I just bought a 2000 Challenger 15ft with the dual rotax 85 hp engines. I am new to this boat but not too sea-doo's my family has a 96 GTX and my brother use to have a 1999 Challenger 1800. Looks like a good forum you guys have here and well i know from my other board everyone like pics so.......

 

[kustomkarl]

Welcome to the seadoo forum ssmedt. This is a friendly place with lots of active members eager to help out and answer your questions.

Karl

 

[ssmedt]

thanks karl, i think these boards are going to help a lot, just have 1 or 2 little problems right now to fix, the black water inlet tubing on the port engine has a small hole in it that i discovered today so it looks like i can just undo the clasp holding the tubing on to the engine and then to the hull and replace the tubbing, my port engine throtle cable needs to be tightened, it will not stay up on it's own utill over half throttle, and the port engine tach and gas guage don't work, but i see these all as rather minor fixes and am looking foward to many happy hours out on the water

 

[kustomkarl]

If you get in a jam, give us a shout and we'll help out as best as we can. If you need a Shop manual we have them in the premium section to download or view on line or print a copy if you want.
It's like $10.95 a month, click on the manual links for details.

Karl